What apprentices leave behind
(01)

Bakery refit, Calder Quay
Joel Haddad · Year 2
A new 14-way distribution board, every circuit labelled.
The board: built, terminated and labelled.
Signed by Rhea Lindqvist · Year 2
(02)

School sports hall
Amira Sesay · Year 1
A 38 m galvanised cable tray run at 4 m height.
The tray run: containment measured, fixed and dressed.
Signed by Rhea Lindqvist · Year 1
(03)

Housing co-op car park
Sven Aalto · Year 3
A charger circuit in armoured cable, glanded into an isolator.
The gland: armoured cable glanded and torque-checked.
Signed by Paloma Iturbe on site · Year 3
(04)

Lift motor room
Noor Rahimi · Year 3
Fault-finding on a motor isolator, test sheet written by hand.
The test sheet: results written by hand and checked against the meter.
Signed by Kofi Mensah · Year 3

What the instructor watches
The gland.
Every turn of the torque spanner matters when securing armoured cable into an isolator. The instructor watches how the brass threads catch, whether the armour wires are trimmed clean without scoring the inner sheath, and how firmly the earth tag is anchored. A gland either seals true or fails under pressure.
The labels.
Neat circuit labels reveal how an electrician thinks about whoever opens the distribution board next. The instructor checks that each neutral and live conductor corresponds exactly to its breaker marking, cut square and dressed straight down the trunking without crossing. If a board cannot be understood at a glance, it is not finished.
The hands.
Good installation habits show in the way tools are handled long before meters are switched on. The instructor watches for deliberate isolation checks, steady wire stripping that leaves no copper nicked, and continuous awareness of posture and ladder safety. Methodical discipline cannot be faked when someone is standing beside your board.
Assessment
How a year on site is judged
24
places per intake
6
signed pieces a year
3
assessor visits a year
41
partner employers

On site
Three times a year, the assessor spends a complete working day with each trainee on site in Calder Quay.
Containment, cable glanding and hand-written test results are looked at in person and signed on the day.
Nobody signs off work they have not watched.
Three visits a year
The assessor comes to your site in each year of the apprenticeship.
A whole working day
Not an hour: the assessor stays from first isolation to last tool counted.
Signed on the day
What was watched is signed before the assessor leaves.
Employers
When an employer takes a trainee on
Forty-one partner employers support our trainees through this route: electrical contractors, facilities teams and a lift company. A trainee is taken on when three conditions are met.
Fees
Fees and intakes
| Open board Saturday 3 hours, try a termination with an instructor | Free |
| Foundation term 12 weeks, full time | €2,400 |
| Apprenticeship tuition, per year 3 years; paid by the employer once signed | €4,800 / year |
| Tool kit and PPE Issued in week 1, yours to keep | €620 |
| Inspection and testing module 10 evenings | €1,150 |
| Practical re-assessment One piece | €180 |
January 2027 intake starts Monday 11 January 2027; applications close Friday 27 November 2026.
September 2027 intake starts Monday 6 September 2027; applications close Friday 4 June 2027.
24 places each.
Journal
Come and terminate a cable on a Saturday.
Open board Saturdays run on the first Saturday of each month from 09:00 to 12:00. Attendance is free: you try a termination with an instructor, in the workshop.





