Class C
Class C training qualifies you to drive commercial rigid lorries up to 18 tonnes gross vehicle weight. Based at our dedicated Ashby Vale yard, the programme builds foundational commercial driving discipline from the ground up.

Entry requirements and preparatory steps
To enrol on our Class C course, you must be at least 18 years old and hold a valid Category B car driving licence. Before beginning practical driving in week 4, you must complete a Group 2 medical using the official D4 form and obtain your provisional commercial entitlement. Our course coordinator, Priya Natarajan, arranges your medical examination with an approved doctor and assists with paperwork. You will also attend two evening coaching sessions in our classroom to prepare for the commercial theory and hazard perception tests before your practical dates are locked in.
The six days
One course, six days.
Yard day 1
Day 1
Walk-round, mirror set-up and the feel of an 18-tonne rigid.
Yard day 2
Day 2
The reversing exercise between cones, blind spots and mirror checks.
Road day 1
Day 3
Town driving and dual carriageway with your instructor.
Road day 2
Day 4
Rural roads, hill starts and a full-length independent drive.
Mock test
Day 5
A test-length drive under test conditions with a second instructor.
Test day
Day 6
A warm-up drive, then the practical test in our rigid.
Training curriculum on an 18-tonne rigid
Practical training takes place in one of our three 18-tonne rigid lorries across five intensive days plus test day. We start every morning with the mandatory walk-round vehicle check, inspecting tyres, wheel nuts, lighting, and air pressure before turning the key. In the yard, you will practice the standardized reversing exercise between cones, mirror alignment, and blind-spot management. Road days expand your experience across Ashby Vale’s town centre, faster dual carriageways, and winding rural routes, developing smooth gear selection, defensive positioning, and constant forward planning.
Can I progress directly from Class C to Class C+E?
Yes, you can enrol directly on our combined C then C+E pathway, which spans ten training days and two test days for £3,380. Candidates complete their Class C rigid training and practical examination first, establishing solid road craft and vehicle control. Once the rigid practical test is passed, you immediately transition to our tractor unit and 13.6-metre curtain-side trailer for articulated training. This structured route allows you to progress through both commercial categories under the supervision of the same instructional team in our Ashby Vale yard.

£1,890
Class C course · 5 training days + test day
£3,380
C then C+E pathway · 10 training days + 2 test days




