Care

/ And questions

Two hands holding a light ash picture frame up against a dark wall.

Eight answers about time, glass, hanging and care

Care · and questions

Here are answers to common questions about our workshop practices, pricing, care routines, and fittings. All framing is carried out by hand at 27 Cooper’s Yard.

How long does framing take?

Standard turnaround is ten working days from the day your order specification is finalized at our counter. This duration allows Tomas Reyes and Kwame Boateng sufficient time to saw forty-five degree mitres, cure corner glue under clamp pressure, cut mount bevels by hand, and seal glazing against dust. If you face a strict deadline, we offer an express service that completes your frame within three working days for a forty-dollar surcharge.

Express slots are subject to bench capacity, so please mention your deadline when booking your counter fitting.

Can I bring an existing frame to be re-fitted or repaired?

Yes, we frequently re-fit and repair existing frames brought to our workshop. Priya Nair examines the condition of the timber corners, backing, and glass to determine necessary conservation steps. We can replace old acidic mounts with fresh conservation board cut to a clean forty-five degree bevel, upgrade regular float glass to UV-filtering museum glass for sixty-five dollars, or rebuild loose mitre joints.

Bring the frame to our counter during public hours so we can inspect structural joints and provide a clear quote before bench work commences.

Do you handle oversize artwork?

We regularly frame large works up to one hundred by one hundred and forty centimetres. Our oversize frame rate is four hundred and twenty dollars and includes specialized two-person handling at the bench and during fitting. For works of this scale, we recommend our deep forty millimetre box profile in oak, ash, or walnut to ensure structural stability.

We often glaze oversize pieces with lightweight, shatter-resistant acrylic to avoid excessive wall load. Eli Brandt can deliver and install oversize frames across Halden during our Tuesday and Friday hanging rounds.

How do I protect artwork from sunlight and fading?

Direct sunlight and ambient ultraviolet light degrade paper, fade ink, and discolor watercolours over time. Standard float glass protects against dust but offers minimal UV filtration. We recommend upgrading to museum glass for sixty-five dollars per frame.

Museum glass filters out damaging ultraviolet rays while maintaining exceptional anti-reflective clarity. For valuable originals, photographic prints, or works displayed opposite bright windows, museum glass coupled with acid-free conservation mounting provides necessary long-term preservation against photochemical fading.

How should I clean the frame and glazing?

Never spray liquid glass cleaner or aerosol polish directly onto the frame, as moisture can seep beneath the rebate and stain the mount or artwork paper. Instead, spray a small amount of ammonia-free glass cleaner onto a clean, soft microfibre cloth until slightly damp, then wipe the glass surface gently. For timber mouldings in oak, walnut, ash, or maple, simply wipe away dust using a clean, dry cloth.

Avoid abrasive sponges, chemical solvents, or furniture waxes, which damage wood patina and degrade delicate hand-applied gilt finishes.

How do I safely hang heavy frames on different walls?

Hanging safety depends directly on matching hardware to your wall construction. For solid brick or masonry walls, drill pilot holes and insert heavy-duty wall plugs with steel screws. For hollow drywall partitions, anchor directly into structural timber wall studs or install zinc spiral hollow-wall fixings.

If you have traditional timber picture rails, hang frames from two brass moulding hooks rather than a single point to distribute weight evenly. Alternatively, book Eli Brandt for our forty-five dollar delivery and hanging service covering up to three frames within twenty-five kilometres.

Can I borrow sample corners to test at home?

Yes, we encourage clients to borrow sample corners to evaluate mouldings within their actual domestic lighting. You may borrow up to six timber corner chevrons for seven days completely free of charge. Take them home and hold them against your wall at different times of day to see how natural morning sun and evening lamps affect the wood tone.

When you return the samples to 27 Cooper’s Yard, Lucía Moreno will help you confirm your final choice during a thirty-minute fitting appointment.

What is your cancellation or order change policy?

Because all timber mouldings and mount boards are cut specifically to your bespoke dimensions, we can accommodate cancellations or design changes only before physical cutting begins at the bench. You may alter your moulding choice, mount colour, or glass selection before craftspeople begin work on your order. Once Tomas Reyes saws the forty-five degree mitres or Nadia Sørensen cuts the conservation mount, materials are committed and cannot be refunded.

Contact Lucía Moreno at +1 555 0127 2011 immediately if you need to adjust order details.

Demo · Use it free in ShipPress · Or buy without the app for US$10English · 繁體中文 · 日本語 · Français · Deutsch
Demo only: this is switched off here.