Cut to fit · 45°

On the bench today
A 50 × 70 walnut frame for a hallway print
Corner joints glued, band clamp on, ready to square.
Mount cut this morning · glazing at 15:00
/ The shop

We frame for the wall,
not for the counter.
A print looks different laid flat on a counter than it does at eye level in a hallway. So before we choose a moulding we ask for a photograph of the wall and its measurements: the ceiling height, the paint, the way the window light falls across it.
Mira Haldane opened Gaku Frames in 2011 with one bench and six woods. The shop is street level, so you can watch the bench from the counter, and every mitre is still cut on the same saw and joined by hand with corner clamps.
A frame should make the picture and the wall agree. We pair solid woods with hand-cut conservation mounts and careful glazing, so the print feels anchored and permanent from the day it is hung.
Mouldings
/ Six woods
Four profiles in six woods, from $95 a frame. Walnut and gilt carry a 20% surcharge. Borrow up to six sample corners for seven days, free, and hold them against your wall.

Walnut from $95 + 20%
Six woods
- Oak 20–40 mm
- Walnut 20–40 mm
- Ash 20–40 mm
- Maple 8–30 mm
- Black-stained ash 20–40 mm
- Gilt leaf 8–30 mm
Profiles
- Flat 20 mm
- Scoop 30 mm
- Box 40 mm
- Slip 8 mm

Oak from $95

Black-stained ash from $95

Ash from $95
Mounts
/ Cut by hand
01
Measure the print and the wall
We measure the paper margins, the image window and the wall itself, so the border suits the height of the eye. A mount that looks generous on the counter can look thin across a hallway, and the tape measure settles it.

02
Cut the 45° bevel by hand
A hand cutter runs along a steel straightedge through acid-free conservation board, one clean 45° bevel at a time. Seven stock shades, five whites and two greys, are cut at the bench every week.

03
Hinge the print with conservation tape
The print hangs from the mount on paper hinges, never glued down flat, so the paper can expand and relax with the seasons. Every hinge can be lifted again without a mark.

04
Glaze, seal and fit
Float glass, or UV-filtering museum glass, is lowered into the rebate. We seal the back with board, fit brass hanging hardware, and the frame leaves the bench ready for its wall.

Prices
/ By size
Frames Upgrades Delivery
| Item | Includes | Price |
|---|---|---|
| Small frame | Up to 30 × 40 cm, in oak, ash, maple or black-stained ash | $95 |
| Medium frame | Up to 50 × 70 cm | $165 |
| Large frame | Up to 70 × 100 cm | $260 |
| Oversize frame | Up to 100 × 140 cm, two-person fitting | $420 |
| Conservation mount | Acid-free board, hand-cut bevel, hinged print | +$28 |
| Museum glass | UV-filtering, low reflection, per frame | +$65 |
| Delivery and hanging | Within 25 km, up to 3 frames | $45 |
Frame prices include a standard mount, float glass and fitting. Walnut and gilt mouldings add 20%. Turnaround is 10 working days; express is 3 working days for +$40.
Delivered
/ To the wall

A large glazed frame is easy to scratch and awkward to hang straight. Within 25 km of Cooper’s Yard we bring it to you, check the wall, fit the right hook and set it level, up to three frames in a single visit.
Eli Brandt runs the hanging rounds every Tuesday and Friday. Plaster, brick, drywall or a picture rail: each gets its own fixing, so the picture stays where we put it.
- $45 delivery and hanging within 25 km
- Tue and Fri hanging rounds
- 3 frames per visit, one flat rate
Journal
/ The bench
/ Visit
27 Cooper’s Yard, Halden
Tue–Sat 10:00–18:00, Thursday until 20:00
Sunday and Monday closed for bench work
Book a fitting
Bring the print. Measure the wall.
30-minute fittings · Tue–Sat






