


Three rooms, three households.
[ Rooms ]
Rather than designing furniture for abstract showrooms, we fit each piece to the awkward angles, low eaves, and tight corners of real homes. Here are three domestic case studies from our workshop.

01
A bed under a sloping roof
A couple with 1.9 m eaves: an Ash Bed Frame cut lower, with drawers under the pitch.

02
A study in the box room
A 2.1 × 2.4 m spare room: a Reading Desk and shelving fitted around a radiator.

03
Six at a kitchen corner
A family of five: a Kiln table at 190 cm and a Hall Bench against the wall.
A bed under a sloping roof
In a converted attic bedroom with eaves dropping to just 1.9 m, a local couple struggled to position a standard bed without blocking natural light or wasting awkward floor space. Tomas Reyes designed a custom double Ash Bed Frame (£1,450) with headboard posts trimmed lower to fit snugly beneath the roof slope. Beneath the slatted mattress base, the workshop integrated deep pull-out storage drawers calibrated to the exact pitch of the eaves. The pale English ash grain brightened the shadowed ceiling line, turning a previously unusable roof space into a calm and functional sleeping loft.

A study in the box room
A spare box room measuring just 2.1 × 2.4 m presented a challenging work-from-home problem for a household in Aldmoor. A large cast-iron radiator beneath the window occupied valuable wall length. Lukas Brandt and Tomas Reyes built our Reading Desk (£1,120) with custom leg spacing that spanned the radiator pipework without blocking heat circulation. Above the desk, we installed slim solid oak wall shelving scribed directly into the plaster alcove. By utilizing the room's vertical height and accounting for the heating fixtures, the small box room was transformed into a productive, uncluttered study.

Six at a kitchen corner
A family of five needed daily dining seating in a compact kitchen corner without obstructing the walkway to the garden terrace. Standard dining sets either overcrowded the room or blocked doorway access. We crafted a Kiln Dining Table in solid oak, cut specifically to a 190 cm length, and paired it with a matching Hall Bench (£640) tucked flush against the perimeter wall. Two Loft Dining Chairs (£395 each) sat opposite. This arrangement seated all five family members and a guest comfortably while keeping traffic paths entirely clear.
