
LUGGAGE FITTING · ANTWERP
Kaban Luggage
Cases fitted to the trip you are actually taking: shells, handles and wheels, chosen at the counter.

Where you are going,
how long you are away,
how much you carry.
Every journey puts its own demands on a case. Before we choose a shell, we ask about the route, the transit connections and the real volume your trip needs. The counter is where that conversation starts.

At the counter
A case is fitted to the trip, not the other way round.
Most luggage is bought from photographs or display rows without consideration for how it will be lifted, wheeled, or stowed. At our Veerkaai counter, we begin with the route itself. Cobblestone streets, tight train corridors, and regional flight weight limits each require specific wheel geometry and shell construction.
During a forty-minute fitting, we unpack the practical realities of your journey. We place your typical packing list on our platform scale, measure volume requirements, and check how the case balances when fully laden. There is no guessing about whether a bag will pass cabin gauges or withstand luggage holds.
You leave with luggage that matches your physical posture and travel habits, assembled from tested components that can be serviced for decades. When a wheel wears down or a handle suffers damage years later, it is repaired in our back room rather than discarded.
What a case is made of
Shell, handle, wheels.
A reliable case rests on three contact points that carry the strain of every trip: the shell around your things, the handle in your hand and the wheels under the load. A fitting checks each one against the journey you are about to take, and the shop stocks the shells that earn their place.


(01)
Hard or soft
Shell
Aluminium takes the knocks of a baggage hold and shows them as honest scuffs. Polycarbonate flexes under load and springs back, which is why it carries the same trip at half the weight. Waxed canvas gives where a hard shell cannot, and slides into a rack.
We choose the shell from the route, not from a showroom shelf. A cabin case that lives on trains is not the case for a cargo hold in August.
- Aluminium
- 4.6–6.9 kg
- Polycarbonate
- 2.4–3.6 kg
- Waxed canvas
- 1.9 kg
(02) Handle


(02)
Height and stride
Handle
A telescopic handle hands the weight of the case to your wrist and shoulder. At the counter we raise it to your height and walk the case beside you until the stride feels easy, with no heel clipping and no stretched arm.
On a duffel the leather top handle does that job. We check the stitching and the canvas around it before anything else.
- Telescopic stages
- 2 or 3, set to your height
- Leather top handle
- Re-stitch €34
- Handle replacement
- €64
(03) Wheels


(03)
Spinner or fixed
Wheels
Four spinner wheels roll a loaded case through a station without lifting it; two inline wheels take cobbles and kerbs better. We weigh the case, look at the housings and pick the set that survives your route.
Wheels are the part that wears first, so every wheel we fit can be unscrewed and replaced in the back room in minutes.
- Spinner wheel pair
- Replacement €38
- Turnaround
- 5 working days
- Cases from other makers
- Repaired too
Forty minutes, free
A fitting at the counter takes forty minutes, costs nothing and needs no purchase.
(1) The trip
Where you are going, how you travel and what the ground is like when you get there.
(2) The packing list
Your packing list goes on the platform scale, so we see the real weight and the carrier limits.
(3) The handle height
We set the telescopic stages to your height and walk the case beside you.
(4) The case
We test the shells and wheels that fit and choose the one that serves your route.


The workshop, behind the counter.
Directly behind the sales counter, the workshop keeps cases in service for decades. We replace worn spinner wheels, re-stitch leather handles, fit new telescopic assemblies and reset locks, with a five-working-day turnaround. We gladly repair cases bought elsewhere.
| Fitting session at the counter (40 minutes) | Free |
| Spinner wheel pair replacement | €38 |
| Telescopic handle replacement | €64 |
| Leather top handle re-stitch | €34 |
| Zip slider repair | €24 |
| TSA lock reset or replacement | €29 |
| Aluminium dent and scuff treatment | €45 |

Visit the shop
Veerkaai 14, 2000 Antwerp, Belgium
Tuesday–Friday 10:00–18:30
Saturday 10:00–17:00 · closed Sunday and Monday
Fittings take forty minutes. Walk in whenever the counter is free, or write to hello@kabanluggage.example and we will keep the hour for you.





